Start-up control equipment ELVERT eTS60, SB10, etc.

Circuit breakers for protection of electric motors eM03, eM08 of the Engard series are designed to control and protect three-phase asynchronous electric motors from overload, short circuit and phase breakage.
They combine the functions of an automatic motor protection switch and a manual starter due to the presence of buttons for controlling the electric motor: "START" to turn on and "STOP" to turn it off.
They are equipped with combined disconnectors with a rated current of up to 80 A: electromagnetic with a fixed setpoint of 12xIn, which protects the motor from short circuit, and adjustable thermal - to protect the motor from overload.

• eM03, eM08. Technical specifications.

The Engard series ETS60 is available in 8 standard sizes depending on the rated operating current.
Rated operating current from 115 to 630 A.
Category of application AC-1, AC-3.
2 versions according to the supply voltage of the control coil – 230 V or 400 V.
There are factory-assembled reversible models with mechanical locking and power terminals connected by tires in accordance with the reverse engine control scheme.

• eTC60. Technical specifications.

The starters closed in the IP65 SB10 housing are designed for remote start/stop of three-phase asynchronous motors with a short-circuited rotor in an alternating current network with a voltage of up to 400 V. The range includes starters with control voltage at 230 and 400 V AC. The device includes a small-sized contactor SS10, a thermal relay TR and control buttons START and STOP.

• The starters are closed in an IP65 SB10 enclosure. Technical specifications.

TR thermal relays are designed to protect electric motors from overload, phase breakage and rotor jamming.
They are used in control circuits of electric drives together with small-sized contactors of the CC10 Series Effica. They are installed directly under the contactor of a compatible size using copper cylindrical relay contact pins.

• Thermal relays TR. Technical specifications.

Additional equipment for contactors:
- Locking devices B;
- Contact prefixes SR;
- Contact prefixes with CD response time delay;
- Thermal relays TR.

• Additional equipment for contactors. Technical specifications.